Die & Mold Manufacturer-Cad/Cam; CNC Machining Center; EDM Sinking &   EDM Drilling, Various die making equipment
 

Process starts with the derivation of client’s specifications. The tool and die section will then use the integrated CAD/ CAM System to design the mold or die based on such specification which will be passed on to the production section. Advanced machine tools like EDM, Diesinking machine, EDM wire cutting machine, CNC milling machines, etc., contribute significantly to the manufacturing of molding
dies. In addition, the efficiency, quality and cost effectiveness translates to a competitive position of the company in the tool and die industry.
 
 
 
  18 units 25 tons to 250 tons Plastic Injection Machines
 
Process involves stringent selection of thermoplastic and thermosetting plastic alloy as raw materials utilize in either horizontal or vertical type productions done in separate machines. Thermoplastics and thermosetting plastic alloy are injected through horizontally and vertically oriented molds.
 
 
 
 14 units Metal Stamping Machines
 
   
  Process commence with rigid choice of raw materials such as cold roll mild steel, coated sheets, electrolytic galvanized sheets, brass, phosphorous bronze, aluminum, stainless steel or alloy in form of sheets, coils or strips. Stamping process covers single process stamping, progressive stamping, or transfer press stamping. Parts are eventually sent to suppliers for secondary processes like plating, painting or printing. Finally, after the finishing processes are done, the finished parts undergo strict quality control measures before final packaging and delivery. Facilities for tapping and bending are also available. Prototyping jobs of parts are also accepted.  
 
 
Sheetmetal CNC Punch Press, Sheetmetal Bending and Fabrication, Tube and Pipe Bending
 
 
 
  Process initiates from tube and pipe cutting, deburring then bending to desired radius. Process used under this section is the Mandrel type tube bending. The Mandrel type tube bending offers superior dimensional evenness throughout the tube after processing. Capacity ranges from ¼ inch (6.35 mm) to 3 inches (76.2 mm) outside diameter.